The Victory® LX Sport offers a maximum speed of 8 mph and per charge range up to 19.7 miles.
Model
Victory® LX Sport 4-Wheel
Weight Capacity 400 lbs.
Front Tires 3.5" x 10" solid
Rear Tires 3.5" x 10" solid
Maximum Speed1 Up to 8 mph
Ground Clearance3 2.2" at motor, 3.15" at mid-frame
Turning Radius3 61.25"
Length / Width3 47" / 25.5"
Standard Seating3 Type: Reclining high-back
Weight" 43 lbs.
Material: Black Vinyl
Dimensions: 18" width, 18" depth
Seat-to-Ground 23-25"
Weight (w/o Batteries) 160 lbs.
Seat-to-Deck 16.5"-18.5"
Battery Weight 30.2 lbs. each
Battery Requirements4,5 Size: (2) 50 AH
Per Charge Range1,2 Up to 19.7 miles at 200 lbs., Up to 13 miles at 400 lbs.
Battery Charger 5 amp, off-board
Suspension Front and rear
Weight of Heaviest Piece3 77 lbs. (front section)
HCPCS Code K0899 - POWER MOBILITY DEVICE, NOT CODED BY DME PDAC OR DOES NOT MEET CRITERIA
Warranty Frame: lifetime limited;
Drivetrain: 2-year limited;
Electronics: 2-year limited;
Battery: 6-months
Notes: 1 Varies with user weight, terrain type, battery amp-hour (AH), battery charge, battery condition and tire condition. These specifications can be subject to a variance of (+/- 10%). 2 Due to manufacturing tolerances and continual product improvement, this specification can be subject to a variance of (+ or 3%). 3 AGM or gel cell type required. 4 Tested in accordance with ANSI/RESNA, WC Vol2, section 4 & ISO 7176-4 standards. Results derived from theoretical calculations based on battery specifications and drive system performance. Test conducted at maximum weight capacity. 5 Battery weight may vary based on manufacturer.
All specifications subject to change without notice. The information contained herein is correct at the time of publication; we reserve the right to alter specifications without prior notice. Speed and range vary with user weight, terrain type, battery charge, battery condition and tire pressure. Due to manufacturing tolerances and continual product improvement, length, width, turning radius and ground clearance can be subject to variance of + or — 3 %. Dimensions listed are for power base only. Overall measurements will vary based on seating and accessory selections.
Meeting and Exceeding High Standards for your Peace of Mind.
Your Pride product has undergone thorough product testing to ensure safety, durability and performance.
Our power chairs, scooters and lift chairs are Food & Drug Administration (FDA) approved medical products that require specific testing prior to release for public use.
The testing requirements accepted by the FDA were developed by the American National Standards Institute/Rehabilitation Engineering & Assistive Technology Society of North America (ANSI/RESNA).
The tests are conducted in accordance with the requirements of the ANSI/RESNA Test Standards and complement an additional stringent testing regiment developed by Pride's Research & Development Team.
All products have passed, and in many cases, exceeded test criteria set forth, assuring the high level of quality synonymous with Pride.
Some of the items our testing criteria include are:
Product Stability & Brakes Effectiveness Tests
Fatigue & Impact Strength Verification Tests
Overall Product Performance Verification
Dimensional Requirement Compliance
Product Durability & Reliability Testing
Material Protective Coating Testing Verification
Misuse and Abuse Testing
Ergonomic Verification
Environmental Testing for Adverse Weather Operation Conditions
Electronic Systems Performance and Durability
Chemical and Bio-Contamination Analysis Testing for Toxicity Verification
Cal 117 Flammability Test Compliance for Seating Foam and Fabric Components
UL94VO Flammability Testing for Compliance of Plastic Components
Electromagnetic Compatibility (EMC)
Warranty
Lifetime limited warranty on frame
2-year limited warranty on electronics
2-year limited warranty on drivetrain